Item # LYN LH-10C42-8-2-P1-CID
LH-10C42-8-2-P1-CID
Call for Price
- Guest Out of Stock
- Contact for ETA
- Minimum Order Qty: 1
- Available Only in Qtys of: 1
- Log in to see if custom discounts apply
Click image to enlarge
Item # LYN LH-10C42-8-2-P1-CID
LH-10C42-8-2-P1-CID
- UM : EA
Lynair series "LH" features
- Industry Standard Mounting Dimensions:
Conform to ANSI standard B3.15-1971 for mounting dimensions of square head industrial fluid power cylinders and meet or exceed JIC pneumatic standards. - Pressure Ratings:
Series “LH” hydraulic cylinders are rated for use at operating pressure levels that vary with bore size, rod diameter, mounting style, and stroke length. Be sure to confirm the maximum recomended operating pressure for your required mounting style. - Cylinder Ports:
NPTF ports are standard and provided unless otherwise requested. SAE O-ring style ports are optional and may be specified at no additional cost. - Piston Rod:
Precision ground, polished, and hard chrome plated piston rods made from high yield strength steel. Male rod threads thru 11/2 diameter are rolled for maximum strength and uniformity. Four wrench flats are provided to aid in making the rod end connection. The rod surface is reduced in size in area of flats to eliminate contact with seals at assembly. - Rod Seals with Spring Expander:
Pressure energized multiple lip packing set consists of three buna-n v-rings supported by a bronze male adapter which aids seal expansion in response to system pressure. A wave spring exerts sufficient preloading to prevent weeping when system pressure is off. - Rod Wiper:
Double lip wiper cleans rod surface of contaminants and prevents entry of harmful particles into sensitive bearing and seal areas. Integral cup form on inboard side of wiper serves as secondary seal to insure leak-free performance. - Exterior Materials:
Front and rear heads are accurately machined from precision square steel blocks. Cylinder tubes, bearing retainers, and mountings are constructed of steel for maximum strength and durability. - External Finish:
Cylinders have enamel finish on exterior with mounting and machined surfaces protected by anti-rust film lubricant at time of shipment. - Piston Seals:
Low friction, self compensating cup type seals provide long, trouble free service. Cylinder sizes thru 6” bore have seals of lubricated (silicone) urethane material. Other bore sizes are equipped with seals of buna-n. piston seals are elastic and snap into piston grooves for easy installation.
Specifications
| MANUFACTURER | LYNAIR |
| RATING | 1500PSI HYDRAULIC |
| STYLE | NFPA, STEEL |
| BORE | 10" |
| STROKE | 8" |
| MOUNT STYLE | MF1 FRONT FLANGE |
| ROD DIAMETER | 2" |
| ROD THREAD | 1 1/2-12 X 2 1/4" MALE |
| CUSHIONING | CUSHIONS BOTH ENDS |
| PORT SIZE | 1" NPT |
| OPTIONS | CHROME TUBE ID |
Documents
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.